Metal Gates Structure

Most of ASE Autogate's wrought iron gates and steel gates are hand crafted by specialist team of in house fabricators. All our security gates are bespoke made to suit individual customer requirements, each gate is then fully galvanised to prevent against rusting. The gates can then be either powder coated or painted if preferred.

The correct size hinges are chosen for each application to suit the weight of the gates and the amount of use the security gates are likely to receive.

If possible we prefer to hinge the gates from steel support posts.
These posts will be concreted into the ground to carry the weight of each gate. If the posts are to be on view they will have the same finish as the gates, alternatively the posts can be installed in such a way as to allow a stone or brick pillar to be erected around the steelwork. The gates then take their strength from the steel posts and do not rely on the pillar to carry the weight of the gate.

Physical gate stops are required with almost all automatic control systems
available. Thus ground levels are a contributing factor in the system’s design and reliability. For the optimum results ground levels should be level or falling away from the underside of the gates throughout leaf swing. For more information about our wrought iron security gates and metal security gates please contact us on 0800 328 6481.

Windsor

Bude

Salisbury

Yeovil

Exeter

Penrith

Maidstone

Halifax

Plymouth

Newark